Power Plants

Take control of your emissions, with the power of our reliable AMPROplus

• Up to 7 gas parameters, plus temperature, pressure, and flow
• +4yr Long-life O2 sensor
• Active CO sensor protection
• Powerful Li-ion battery provides up to 20hrs of operating time
• Extensive probe selection
• Easy Bluetooth connection to the powerful MRU4U App or printer

Gas flow velocity and flow rate measurement

• Flow rate calculation (m3/sec) after entering the stack surface.
• With flue gas temperature and absolute pressure measurements
• With optional heater for low ambient temperature and optional blow-back for dusty flue gas
• Unit in weatherproof glass fiber housing

DUST OPACITY MONITORING SYSTEM. Double pass opacity monitor. Continuous in-situ measurement.

• Double pass opacity monitor
• Small and light-weight
• Low operating cost
• Minimal maintenance – no moving parts
• Long Life green LED

Simplify compliance testing and ensure success with our dependable, user-friendly combustion emissions analyzer

• Combination of infrared measurement technology and electrochemical sensors
• Automatic measuring program with data recording
• Automatic zero-point measurement for long-term measurements

In-Situ Oxygen and Combustibles (COe) Transmitter

• All combustions with combustion temperatures up to max. 3,092 °F (1,700 °C) (see different models)
• Die casting aluminum enclosure with electronics, keyboard, up-front display of O₂ and COe*
• COe measurement
• Compressed air back-purge with control valve complete with electronics

O2 & COe in-situ monitoring system for use in hazardous area zone 2

• Hazardous area designation of use: Zone 2 or Class 1, Div 2, Gr A/B/C/D
• Special IP 65 pressurized cabinet and z-purge controller, complying to II 3G Ex pz II T3 Gc
• Easy and fast, on site replaceable detector head with sensors (O2 & COe)
• Dust tight and water proof enclosure, with optional ATEX heater for very low ambient air temperatures or optional ATEX Vortec cooler for high ambient temperatures

In-Situ real time analysis of Oxygen (O2) and combustibles (COe)

• Model for high temperature
• With automatic back-purge using solenoid valve controlled by transmitter electronics
• With 10m special cable between probe and transmitter
• Die casting aluminum enclosure with electronics, keyboard, up-front display of O₂ and COe*

• In-Situ real-time analysis of Oxygen (O2) and combustibles (COe)
• Remote transmitter probe
• Model available with and without back purge

Stationary Analyzer for Continuous Emission Monitoring

• up to 6 gas simultaneous measurement
• Advanced sample gas preparation for fast and reliable measurements
• Simple installation, ready to run delivery and easy to maintain.
• Heated gas sampling probe

Complete CEM system for emissions monitoring

• dual heat exchanger M&C Peltier gas cooler with double automatic condensate draining pumps
• Efficient sample gas filtration using PTFE sintered particulate filter
• Condensate monitoring and alarm on display and gas sampling stop in case of alarm
• Filtration of acid gases to protect the internal sample gas flow sensor

Portable stack gas emission analyzer for long time measurements of industrial combustions

• Most suitable for precise low Nox measurements and other toxic gas emissions measurement
• All important interfaces are available, such as Ethernet (LAN), WLAN, Bluetooth, USB, RS485, 8 channel analog Outputs.
• Lithium-ion battery operation, including gas cooler and measurement technology.