CALL US: (832) 230-0155

BIOGAS Application Tool

Use this form to submit your information to help us select the right product for your application.

We will contact you shortly to discuss your application and offer recommendations.

Name*
First Last
Email*
Enter Email Confirm Email
Company / Organization*
COINTRY*
PLEASE NOTE: we only sell our products within the USA, Canada, Mexico and Central America. All other countries, please contact your local MRU representative or contact info@mru.de
Address*
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code
Phone*
Type of application*
GAS COMPOSITION
ALL elements present in the gas mixture must be listed! / ALL non-listed gases may affect the warranty of the analyzer! NOTE: If more than one gas sample port is chosen, the gas composition for each additional gas sample port must be specified!
CH4 – Methane - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
CO2 – Carbon dioxide - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
O2 – Oxygen - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
H2S – Hydrogen Sulfide - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
CO – Carbon monoxide - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
If known, please complete below:
H2 – Hydrogen - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
Relative humidity - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
N2 – Nitrogen - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
NH3 – Ammonia - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
H2O – Water vapor - Ranges at 1 ATM
MIN value Max value Nominal value enter ppm or % Comments
Inert gases (He, Ar, etc.) - Ranges at 1 ATM
SPECIFY MIN value Max value Nominal value enter ppm or % Comments
Alkanes (Acetylene, Ethene, etc.) - Ranges at 1 ATM
SPECIFY MIN value Max value Nominal value enter ppm or % Comments
Others: - Ranges at 1 ATM
SPECIFY MIN value Max value Nominal value enter ppm or % Comments
ANALYZER REQUIREMENTS
Gases needed to be monitored*
- O2 - 0 ... 25%
- CO2 / CH4 - 0 ... 100%
- H2S very low 0 ... 50 .... 250ppm
- H2S high 0 ... 2,000ppm .... 5,000ppm
- H2S very high up 100,000 with dilution system
- H2 0 ... 1,000 .... 2,000ppm
- H2 0 ... 1% .... 2%
- CO 0 ... 4,000 .... 20,000ppm
Note: CO is only useful for landfill sites, to detect underground fire
Sample point details*
Sample point details - ambient temperature MIN - MAX (°F)*
Sample point details - gas pressure MIN - MAX (inH2O)*
Sample point details - gas moisture*
Sample point details - flame arrestor needed*
Sample point details - shut off valve*
Sample point details - condensate drain*
Sample point details - size of sampling tube ID/OD*
Sample point details - sampling tube material*
Sample point details - sampling line freeze protection needed*
Analyzer location details*
Analyzer location details - ambient temperature MIN - MAX (°F)*
Analyzer location details - number of switched sampling points needed (2 to 10)*
Note: one analog output module 4 channel 4-20mA for each sampling point will be provided
Analyzer location details - gas pressure at inlet MIN - MAX (inH2O)*
Analyzer location details - power supply VOLT / Hz*
Analyzer location details - forced ventilation of analyzer ambient*
Note: only for indoor required
Needed options*
- Electric gas cooler (with automatic condensate draining pump)
- RS485 to USB converter
- RS485 to Profi-Bus converter
- RS485 to Ethernet converter
- Module with 4chanel 4-20mA analog output
- Cabinet heater for freeze protection
- Combustible gas detector (%LEL mounted inside analyzer cabinet)
- None of the above
Additional information*

CALL MRU NOW

MIN value	Max value	Nominal value	enter ppm or %	Comments

MIN value	Max value	Nominal value	enter ppm or %	Comments

MIN value	Max value	Nominal value	enter ppm or %	Comments

MIN value	Max value	Nominal value	enter ppm or %	Comments

CALL US: (832) 230-0155

BIOGAS Application Tool

GAS COMPOSITION

If known, please complete below:

ANALYZER REQUIREMENTS